Tips on how to use

the code generator

1. Be sure the screen resolution is set to high 4 and any codes are off.

2. Take your drag car and go to the 400m run.

3. Enter the settings menu and go to the rear downforce slide. Max it out to 0.85

4. Go back into the gameshark and go to the menu. Enter "CODE GENERATOR". Then choose "UNKNOWN VALUE SEARCH" Then go to "CHANGE SEARCH AREA" Set it to search area 8. This is because most of the codes we are using now fall within the values given.

5. After you set it to search area 8 Go to "START" and click on it . Return to game.

6. Take the rear downforce slide bar and move it down to 0.79 . Renter gameshark go to "LESS THAN LAST" click on it. Now it searched the game and brought up another menu. Click on "VIEW SEARCH RESULTS"

7. Do you see the second result:
801b9eda 00079
You may have to push the select button to see it.

8. Now move down to it and click on it. It should of transferred it to the box on the right.

9. Move the direction keys over to the right box and push the "SQUARE" button. this brings up a menu. Change the value to read 0255 and push the "X" key. It should of changed the value of the code in box on the right. code should now read 801b9eda 0255.

10. Push the "CIRCLE" button to exit from this screen and go to "EXIT TO MAIN MENU" once you are there TURN THE CODE ON.

11. Enter the game. rear downforce will now be at 2.55. Push the "X" button to leave the downforce settings menu. Go back into the GS PRO and turn the code to off.

12. Now go run the car your time should of improved with the extra downforce pushing on the rear of the car.


You are done with this. You can do this with any of the car settings. Just remember to reset the code generator each time you try another adjustment. If you are still adjusting the same part it is not necessary, just change the value.

HAVE FUN !!!!!!